OPF-G43x/48, RMRcc (Optics Platform, Forward Controls, G43x/48, RMRcc) is the latest member of the OPF line. G43x and 48 MOS slides are designed for direct mounting of the Shield RMSc sight. Trijicon's RMRcc is longer, and requires an adapter plate which also necessarily raises the mounting surface in order to mount an RMRcc. RMRcc has its own footprint. Gone are the two lug holes in front, these are replaced by two larger diameter threaded posts (bosses) through which the sight to mount/plate screws are installed. The sight to mount/plate screws are also significantly strengthened, though with the OPF-G, RMRcc design that holds the sight immobile on the plate, the larger diameter and stronger screws aren't as important, we always welcome screws that are less likely to strip. With the OPF-G43x/48, RMRcc, we didn't merely raise the mounting surface to provide a platform for the RMRcc. As RMRcc is longer than the G43X/48 MOS cut, the sight overhangs on the slide. When installed, the bottom of RMRcc (with Trijicon provided sealing plate installed) is almost flush with the top of the slide so the sight is as low as possible. We positioned the RMRcc towards the center of the plate as much as feasible, this is done to reduce the amount of unsupported overhang on the RMRcc's sealing plate in front. RMRcc has a rubber gasket around its battery compartment to keep water and moisture at bay, which pushes the sealing plate downward. This isn't an issue if the plate is of the same length as the RMRcc, but with an overhang, it creates a slight gap between the gasket and the sealing plate. OPF-G43x/48, RMRcc's design eliminates the gap/opening between the sight and sealer plate, to the point of emulating a plate that's as long as the sight itself. To wit, if the plate is as long as the RMRcc, it will make the installed height of RMRcc even taller, which is the very reason we chose to let the sight overhang. Torque value: Plate to slide: 12 to15 in·lbs. Sight to plate: 18 in·lbs.. Weight: 0.75oz Material: 1018 steel, black nitrided
Kraftig adapterplate for optimal montering av RMRcc på Glock 43/48
OPF-G43x/48, RMRcc (Optics Platform, Forward Controls, G43x/48, RMRcc) er den nyeste medlem av OPF-serien. G43x og 48 MOS-skjoldene er designet for direkte montering av Shield RMSc-siktet. Trijicon's RMRcc er lengre og krever en adapterplate som også hever monteringsflaten for å kunne montere RMRcc.
Spesifikasjoner
- RMRcc har sitt eget fotavtrykk. De to festepunktene foran er erstattet av to større gjengede pinner (bosses) hvor siktet til monterings-/plater skruene installeres.
- Forsterkede skruer: Skruene til siktet er betydelig styrket, men med OPF-G, RMRcc-designen som holder siktet fast på platen, er ikke de større og sterkere skruene like viktige. Vi setter alltid pris på skruer som er mindre utsatt for stripping.
- Optimal plassering: Vi har plassert RMRcc så nær midten av platen som mulig for å redusere mengden av unsupported overhang på RMRcc's tetningsplate foran.
- Vannbeskyttelse: RMRcc har en gummipakning rundt batterirommet for å holde vann og fuktighet unna, noe som presser tetningsplaten nedover.
Designet til OPF-G43x/48, RMRcc eliminerer gapet mellom siktet og tetningsplaten, til det punktet at det etterligner en plate som er like lang som siktet selv. Hvis platen er like lang som RMRcc, vil det gjøre den installerte høyden av RMRcc enda høyere, noe som er grunnen til at vi valgte å la siktet overhenge.
Monteringsdetaljer
- Momentverdi:
- Plate til skjold: 12 til 15 in·lbs.
- Sikte til plate: 18 in·lbs.
- Vekt: 0.75 oz
- Materiale: 1018 stål, svart nitridert